mm22, mm24 www.vishay.com vishay dale revision: 30-nov-11 1 document number: 36008 for technical questions, contact: connectors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 rack and panel connectors military, mil-c-28748/7/8 qualified and commercial microminiature rectangular with optional hoods features ? qualified to mil-c-28748/7/8 ? solder cup contacts ? dip solder contacts ? fixed and turnable screwlocks ? optional closed entry socket contacts applications especially suited for use in airborne, instrumentation and portable equipment applications or wherever the following requirements must be met: minimum space and weight without sacrifice of performanc e, high quality materials, long service life, high vibration and shock resistance and positive locking. electrical specifications current rating: model mm22 = 5 a model mm24 = 3 a breakdown voltage: at sea level: 2000 v rms at 70 000 feet: 500 v rms material specifications contact pin: phosphor bronze contact socket: phosphor bronze (beryllium copper available on request) contact plating: gold screwlocks: stainless steel, passivated guides: brass, gold plated or stainless steel, passivated standard body: glass-filled diallyl phthalate per mil-m-14, model sdg-f, green dimensions in inches [millimeters] contact gauge b diameter contact gauge c dip tail length d diameter 22 awg 0.030 0.001 [0.762 0.025] 22 awg 0.160 or 0.350 [4.06 or 8.89] nom. 0.025 [0.635] 24 awg 0.025 0.001 [0.635 0.025] 24 awg 0.160 or 0.350 [4.06 or 8.89] nom. 0.025 [0.635] mms with solder cup contacts mmp with solder cup contacts 0.034 [0.864] dia. solder cup 0.110 [2.79] typ. b 0.140 [3.56] mmds with dip solder contacts mmdp with dip solder contacts d 0.030 [0.762] 0.140 [3.56] c d
mm22, mm24 www.vishay.com vishay dale revision: 30-nov-11 2 document number: 36008 for technical questions, contact: connectors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches [millimeters] hardware type e diameter f diameter 026 0.078 [1.98] 0.125 [3.17] 026l 0.078 [1.98] 0.125 [3.17] 027 0.078 [1.98] 0.125 [3.17] 027l 0.078 [1.98] 0.125 [3.17] mms with fixed (026, 027) guides 0.520 [13.21] 0.230 [5.84] 2-56 unc-2a thread typ. 0.030 [0.762] wide x 0.040 [1.02] deep slot typ. 0.110 [2.79] 0.140 [3.56] f dia. 0.034 [0.864] dia. solder cup #22 or #24 awg max. mmp with fixed (026, 027) guides 0.140 [3.56] ?a? end of connector 0.230 [5.84] e dia. 0.490 [12.45] 0.140 [3.56] mms with fixed (026l, 027l) guides 0.040 [1.02] typ. 0.620 [15.75] 0.230 [5.84] 0.140 [3.56] 0.110 [2.79] 0.034 [0.864] dia. solder cup #22 or #24 awg max. 0.030 [0.762] typ. mmp with fixed (026l, 027l) guides 2-56 unc-2a typ. 0.590 [14.99] 0.250 [6.35] ?a? end of connector short turnable screwlocks (sk030) 0.500 [12.70] 0.160 [4.06] 0.540 [13.72] 0.030 [0.762] wide x 0.040 [1.02] deep typ. 0.110 [2.79] 0.140 [3.56] 0.124 [3.15] dia. turnable screwlocks (sk) 0.110 [2.79] 0.950 [24.13] 0.910 [23.11] 0.046 [1.17] wide x 0.062 [1.57] deep typ. 0.187 [4.75] dia. fixed screwlocks (sl) 0.140 [3.56] 0.490 [12.45] 0.520 [13.21] fixed screwlocks (sll) 0.034 [0.864] dia. solder cup #22 or #24 awg max. 0.140 [3.56] 0.230 [5.84] 0.110 [2.79] 0.620 [15.75] 0.590 0.250 [6.35] [14.99] fixed screwlocks and nylon retaining nut and fiber washer (nsl) 0.620 [15.75] 0.590 [14.99] short turnable screwlocks (sk2035) 0.580 [14.73] 0.140 [3.56] 0.110 [2.79] 0.610 [15.49] 0.240 [6.10] typ. 0.093 [2.36] hex socket 0.090 [2.29] deep typ. 0.180 [4.57] dia.
mm22, mm24 www.vishay.com vishay dale revision: 30-nov-11 3 document number: 36008 for technical questions, contact: connectors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 hardware mating chart hardware model mates with hardware model note: either mmp or mms connectors may be ordered with any type of hardware shown. examples: 1. mmp with 026 hardware would mate with an mms with 026 hardware. 2. mms with sk hardware would mate with an mmp with sl or nsl hardware. 3. mms with sl2 hardware would mate with an mmp with sk2 or sk2030 hardware. 026 026, 026l 027 027, 027l sk sl, nsl or sll sk030 sl, nsl or sll sk2 sl2, nsl2 or sl2l sk2030 sl2, nsl2 or sl2l sk2035 sl2, nsl2 or sl2l dimensions in inches [millimeters] note: the views below show the wiring side of a pin model connector (female is opposite). socket hardware assembled at ?a? contact e nd of a pin model connector. 7 contacts 5 contacts 9 contacts 11 contacts 14 contacts 18 contacts a b c d e 0.380 [9.65] 0.656 [16.66] 0.870 [22.10] 0.190 [4.83] ab c d e f h j k m l n p r s t u v 0.656 [16.66] 0.880 [22.35] 0.105 [2.67] a b c d e f h j k 0.880 [22.35] 0.270 [6.86] 0.625 [15.88] 0.135 [3.43] a b c d e f h j k l m n r p 0.690 [17.53] 0.468 [11.89] 0.105 [2.67] 0.030 [0.762] r typ. (5 thru 9) 0.210 0.020 [5.33 0.508] 0.210 0.020 [5.33 0.508] 0.210 0.020 [5.33 0.508] 0.790 [20.07] 0.562 [14.27] 0.105 [2.67] a b c e d f h 0.270 [6.86] 0.532 [13.51] 0.780 [19.81] 0.060 [1.52] r typ. (11 thru 44) 0.135 [3.43] a b c d e f h j k l m 20 contacts 1.06 [26.92] 0.814 [20.68] 0.135 [3.43] 0.270 [6.86] a b c d e f h j k l m n p r s t u v w x 44 contacts 0.190 [4.83] 1.50 [38.10] 0.380 [9.65] 1.28 [32.51] a b c d ef j h k l m n pr s t uv w x y z aa bb cc dd ee ff hh jj kk ll mm nn pp rr ss tt uu vv ww xx yy zz 26 contacts 1.25 [31.75] 1.0 [25.40] 0.135 [3.43] 0.270 [6.86] b c d e f h j k l m n p r s t u v a z y x b d w c a 29 contacts 1.09 [27.69] 1.34 [34.04] 0.135 [3.43] 0.270 [6.86] t u a b c d f e h j k l m n p r s v w x y z a b c d e f h 34 contacts 0.190 [4.83] 1.03 [26.16] 1.25 [31.75] 0.380 [9.65] a b c d ef hj k l mn p r s t uv w y z aa x bb cc dd ee ff hh jj kk ll mm nn 50 contacts 0.190 [4.83] 1.41 [35.81] 1.62 [41.15] 0.380 [9.65] ab c d e f hj k l m n a p r st u v w aa x y z bb cc dd ee ff hh b c d e f h j k m n p rs tu v w x y z
mm22, mm24 www.vishay.com vishay dale revision: 30-nov-11 4 document number: 36008 for technical questions, contact: connectors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mounting variations in inches [millimeters] dip solder pc board mounting patterns male (mmp) connector shown - female is opposite. contact, contact row and mating hole c l to c l dimensions also applies to solder cup style connectors. 5 contacts 7 contacts 0.140 [3.56] typ. 0.562 [14.27] 0.093 [2.36] dia. typ. 0.282 [7.16] ref. 0.047 [1.19] typ. 0.081 [2.06] 0.040 [1.02] a b 0.140 [3.56] typ. 0.081 [2.06] 0.093 [2.36] dia. typ. 0.040 [1.02] 0.468 [11.89] 0.188 [4.78] ref. 0.047 [1.19] typ. 9 contacts 0.140 [3.56] typ. 0.047 [1.19] typ. 0.093 [2.36] dia. typ. 0.081 [2.06] 0.040 [1.02] 0.376 [9.55] ref. 0.656 [16.66] a b a b 0.047 [1.19] typ. 14 contacts 0.124 [3.15] typ. 0.162 [4.11] 0.081 [2.06] 0.376 [9.55] ref. 0.093 [2.36] dia. typ. 0.625 [15.88] 11 contacts 0.047 [1.19] typ. 0.090 [2.29] typ. 0.270 [6.86] ref. 0.656 [16.66] 0.376 [9.55] ref. 0.135 [3.43] typ. 0.093 [2.36] dia. typ. 0.140 [3.56] typ. 18 contacts 0.125 [3.17] typ. 0.162 [4.11] 0.532 [13.51] 0.282 [7.16] ref. 0.047 [1.19] typ. 0.081 [2.06] 0.093 [2.36] dia. typ. a b c a b c a b c d 29 contacts 0.162 [4.11] 0.047 [1.19] typ. 0.846 [21.49] ref. 0.093 [2.36] dia. typ. 0.124 [3.15] typ. 0.081 [2.06] 1.09 [27.69] a b c 20 contacts 26 contacts 0.093 [2.36] dia. typ. 0.162 [4.11] 0.124 [3.15] typ. 0.047 [1.19] typ. 0.081 [2.06] 1.0 [25.40] 0.752 [19.10] ref. a c b 0.081 [2.06] 0.047 [1.19] typ. 0.162 [4.11] 0.125 [3.17] typ. 0.093 [2.36] dia. typ. 0.564 [14.33] ref. 0.814 [20.68] a b c 50 contacts 44 contacts 34 contacts 0.093 [2.36] dia. typ. 1.03 [26.16] 0.140 [3.56] typ. 0.270 [6.86] typ. 0.135 [3.43] 0.090 [2.29] typ. 0.752 [19.10] ref. 0.047 [1.19] typ. a b c d 0.093 [2.36] dia. typ. 1.41 [35.81] 0.140 [3.56] typ. 0.270 [6.86] ref. 0.135 [3.43] typ. 0.090 [2.29] typ. 1.13 [28.70] ref. 0.047 [1.19] typ. a b c d a b c d 0.093 [2.36] dia. typ. 1.28 [32.51] 0.147 [3.73] typ. 0.270 [6.86] typ. 0.135 [3.43] 0.090 [2.29] typ. 0.987 [25.07] ref. 0.047 [1.19] typ.
mm22, mm24 www.vishay.com vishay dale revision: 30-nov-11 5 document number: 36008 for technical questions, contact: connectors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 panel cutout in inches [millimeters] number of contacts a b c number of contacts abc 5 0.210 [5.33] 0.468 [11.89] 0.340 [8.64] 20 0.270 [6.86] 0.814 [20.68] 0.690 [17.53] 7 0.210 [5.33] 0.562 [14.27] 0.440 [11.18] 26 0.270 [6.86] 1.0 [25.40] 0.870 [22.10] 9 0.210 [5.33] 0.656 [16.66] 0.530 [13.46] 29 0.270 [6.86] 1.09 [27.69] 0.970 [24.64] 11 0.270 [6.86] 0.532 [13.51] 0.410 [10.41] 34 0.380 [9.65] 1.03 [26.16] 0.910 [23.11] 14 0.270 [6.86] 0.625 [15.88] 0.500 [12.70] 44 0.380 [9.65] 1.28 [32.51] 1.16 [29.46] 18 0.380 [9.65] 0.656 [16.66] 0.530 [13.46] 50 0.380 [9.65] 1.41 [35.81] 1.28 [32.51] dimensions in inches [millimeters] panel cutout note: the views below show the wiring side of a pin model connector (socket style is opposite). socket hardware is assembled at ?a? c ontact end of pin connector. in inches [millimeters] dip solder pc board mounting patterns male (mmp) connector shown - female is opp osite. contact, contact row and mating hole c l to c l dimensions also applies to solder cup style connectors. a c b 0.093 [2.36] 0.050 [1.27] r typ. ?c50? configuration 0.093 [2.36] 0.160 [4.06] 0.093 [2.36] dia. typ. 0.360 [9.14] ref. 0.090 [2.29] typ. 0.180 [4.57] typ. 0.155 [3.94] typ. 0.344 [8.74] 0.172 [4.37] 0.893 [22.68] ref. 0.047 [1.19] typ. 1.20 [30.48] c e b d a 0.500 [12.70] 0.172 [4.37] 0.250 [6.35 0.060 [1.52] r 0.344 [8.74] 0.113 [2.87] 0.080 [2.03] typ. 1.20 [30.48] 1.43 [36.32] 0.155 [3.94] 0.047 [1.19] typ. 0.893 [22.68] ref. 0.093 [2.36] r 2 places 0.126 + 0.002 - 0.000 [3.20 + 0.051 - 0.000] dia. typ. 0.090 [2.29] typ. ?c50? configuration 1.20 [30.48] 0.344 [8.74] 0.500 [12.70] 0.172 [4.37] 0.250 [6.35] 0.093 [2.36] 1.08 [27.43] 0.093 [2.36] dia. typ.
mm22, mm24 www.vishay.com vishay dale revision: 30-nov-11 6 document number: 36008 for technical questions, contact: connectors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 hood variations in inches [millimeters] number of contacts a 0.016 [0.406] b 0.030 [0.76] c d 0.016 [0.406] e cable opening sq. in. [mm 2 ] 5 0.690 [17.53] 0.650 [16.51] 0.468 [11.89] 0.310 [7.87] 0.028 [0.711] 7 0.780 [19.81] 0.650 [16.51] 0.562 [14.27] 0.440 [11.18] 0.037 [0.940] 9 0.870 [22.10] 0.650 [16.51] 0.656 [16.66] 0.500 [12.70] 0.052 [1.321] 11 0.780 [19.81] 0.650 [16.51] 0.532 [13.51] 0.440 [11.18] 0.054 [1.372] 14 0.870 [22.10] 0.650 [16.51] 0.625 [15.88] 0.500 [12.70] 0.076 [1.930] 20 1.06 [26.92] 0.650 [16.51] 0.814 [20.68] 0.620 [15.75] 0.105 [2.667] 26 1.25 [31.75] 0.650 [16.51] 1.00 [25.40] 0.620 [15.75] 0.105 [2.667] 29 1.34 [34.04] 0.650 [16.51] 1.09 [27.67] 0.620 [15.75] 0.105 [2.667] 34 1.25 [31.75] 0.650 [16.51] 1.03 [26.16] 0.500 [12.70] 0.160 [4.064] 44 1.50 [38.10] 1.17 [29.72] 1.28 [32.51] 0.500 [12.70] 0.190 [4.826] 50 1.62 [41.15] 1.17 [29.72] 1.41 [35.81] 0.620 [15.75] 0.202 [5.131] 027h 5, 7, 9 contacts 0.090 [2.29] d a e 2-56 unc-2a 0.220 [5.59] c 0.300 [7.62] b 0.268 0.016 [6.81 0.406] 0.610 0.030 [15.49 0.762] 11, 14, 20, 26, 29 contacts b 0.640 [16.26] 0.090 [2.29] e a 2-56 unc-2a d 0.220 [5.59] c 0.300 [7.62] 0.348 0.016 [8.84 0.406] 34, 44, 50 contacts c 0.090 [2.29] 2-56 unc-2a d a e 0.640 [16.26] 0.220 [5.59] 0.300 [7.62] b 0.452 0.016 [11.48 0.406] 5, 7, 9 contacts skh or sk2h 0.220 [5.59] c b 0.300 [7.62] 0.046 [1.17] 0.092 [2.34] a d 0.268 0.016 [6.81 0.406] 0.610 0.030 [15.49 0.762] 0.570 0.030 [14.48 0.762] e 0.090 [2.29] 2-56 unc-2a 11, 14, 20, 26, 29 contacts 0.300 [7.62] 0.092 [2.34] c 0.220 [5.59] b 0.046 [1.17] 0.090 [2.29] a 0.640 [16.26] e d 2-56 unc-2a 0.348 0.016 [8.84 0.406] 0.570 0.030 [14.48 0.762] 34, 44, 50 contacts 0.300 [7.62] 0.220 [5.59] 0.092 [2.34] b 0.046 [1.17] c e 0.640 [16.26] d 0.090 [2.29] a 2-56 unc-2a 0.452 0.016 [11.48 0.406] 0.570 0.030 [14.48 0.762]
mm22, mm24 www.vishay.com vishay dale revision: 30-nov-11 7 document number: 36008 for technical questions, contact: connectors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) to order complete connector with hardware supplied unassembled, add suff ix ua on end of hardware designation. (2) 50 contact connectors are av ailable in either the standard 4-row contact ar rangement per mil-c-28748 or a special 5-row contact arrangement. to order the special 5-row contact arrangemen t, use the designator c50 for the number of contacts. ordering information connector hoods hardware - g plati n g 026 (1) hardware v ariatio n s 5 n umber of co n tacts d1 termi n atio n r (optio n al) h hood v ariatio n s 22 co n tact size b (optio n al) p co n tact style mm model c co n tacts (omit if no hard w are desired) 026 = slotted b rass g u ides 0.078" [1.98 mm] diameter 026l = slotted b rass g u ides 0.078" [1.98 mm] diameter 027 = slotted cres g u ides 0.078" [1.98 mm] diameter 027l = slotted cres g u ides 0.078" [1.98 mm] diameter sl = chassis mo u nted fixed scre w locks (3-48 thread) sl2 = chassis mo u nted fixed scre w locks (2-56 thread) sll = chassis mo u nted fixed scre w locks (3-48 thread) sl2l = chassis mo u nted fixed scre w locks (2-56 thread) n sl = chassis mo u nted fixed scre w locks (3-48 thread) w ith nylon retaining n u ts and fi b er w ashers n sl2 = chassis mo u nted fixed scre w locks (3-48 thread) w ith nylon retaining n u ts and fi b er w ashers sk = ca b le mo u nted - t u rna b le scre w locks (3-48 thread) sk2 = ca b le mo u nted - t u rna b le scre w locks (2-56 thread) sk030 = ca b le mo u nted - t u rna b le scre w locks (3-48 thread) w ith short kno b s sk2030 = ca b le mo u nted - t u rna b le scre w locks (2-56 thread) w ith short kno b s sk2035 = ca b le mo u nted - t u na b le scre w locks (2-56 thread) w ith socket head kno b s long long long long microminiat u re (optio n al) closed entry socket contacts optional on 22 awg socket contacts only . (omit for standard contacts) (optio n al) dip solder termination optional. (omit for standard solder c u p) select tail length: d1 = 0.160" [4.06 mm] nominal d2 = 0.350" [8.89 mm] nominal b = berylli u m copper contacts optional on solder c u p socket contacts only . (omit for standard contacts) 5, 7, 9, 11, 14, 18, 20, 26, 29, 34, 44 or 50 (2) p = pin s = socket 22 awg = 0.030 " [0.762 mm] diameter 24 awg = 0.025 " [0.635 mm] diameter optional plating a v aila b le: g = gold (0.00003 thick) o v er n ickel g5 = gold (0.00005 thick) o v er n ickel omit designator for gold (0.00001 thick) o v er n ickel r = re v ersed g u ides or scre w locks (omit for standard) (omit if no hood desired) 027h = hood (top ca b le opening) w ith standard 027 slotted cres g u ides this option is not a v aila b le in the c50 contact size skh = hood (top ca b le opening) w ith long sk-model t u rna b le scre w locks (3-48 n f) and kno b s this option is not a v aila b le in the 34, 44, 50 and c50 contact sizes. sk2h = hood (top ca b le opening) w ith long sk-model t u rna b le scre w locks (2-56 n f) and kno b s. this option is not a v aila b le in the c50 contact size.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
